Cisco 1300 Series bridge losing ethernet connection
I have a pretty simple point-to-point bridge setup using Cisco 1300 series bridges running the latest IOS. Bridge at the main site is the root, remote site is non-root. The bridges link up and pass traffic just fine. Problem is, several times a day the root bridge will lose connection to the LAN. From the remote site, I can ping the root bridge just fine, using large packets, no packet loss, 5ms response times. But I cannot get to the rest of the network from there. The root bridge itself cannot ping anything on the local network. After power-cycling the root bridge, everything is happy again. Any ideas?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...