I am trying to configure 2 Cisco Mesh AP for Root and Pole top access with 2006 controller running the latest version 4.0 firmware. One of the AP connected to the wired network comes up as a MAP (actually according to Cisco Documentation, it should show up as a RAP)and IP address is assigned to the AP from the Internal DHCP Server of the Controller.The other AP which has to connect to the Root AP over a wireless backhaul continously reboots with no information on the type of AP.I have tried to change the role of AP from the CLI but there is no change. The AP run VXworks 2.0 firmware.
There are known bugs with the 4.0 firmware (specifically 188.8.131.52 and MESH 1500 APs) relating to the specificity of what type of MESH AP it is. This also holds true with WCS (assuming you have this product in the mix with the controller). I do not follow the AP running VxWorks 2.0, are you trying to doing MESHing with this AP? What kind of AP is this? Can you provide any more information and details about the scenario and what is trying to be done?
The Access Point is Aironet Enabled LWAPP and i am running 2006 Controller with a Root 1500 connected to the controller through a Layer 2 Switch. The Access Points associate to the Controller but comes up as a Mesh AP and according to the documentation it should come up as a Root AP(RAP).
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...