Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 1600i and 2504 Configuration Issues

Hello Guys, 

I need some serious help, please!

I'm having a heck of a issue getting my 3 AIR-SAP-1602I-A-KP (Standalone) device to work with my WLC 2504

I was told by Cisco that the standalone version will also work with controllers, but i cant get them to join the WLC.  

I can ping each AP from the WLC and vise versa.

Ideas Please?

 

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

You will need to convert your

You will need to convert your APs to run controller-based IOS before the APs can join the WLC.  

 

This process is easy.  Go to the Cisco website and download the file with the "rcv" in the filename.  Un-pack the TAR file into the AP and let the AP boot this IOS and you should be fine. 

1 REPLY
Hall of Fame Super Gold

You will need to convert your

You will need to convert your APs to run controller-based IOS before the APs can join the WLC.  

 

This process is easy.  Go to the Cisco website and download the file with the "rcv" in the filename.  Un-pack the TAR file into the AP and let the AP boot this IOS and you should be fine. 

115
Views
0
Helpful
1
Replies