Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2821 with HWIC-AP-G-A module

I've got a HWIC-AP-G-A module in my 2821 that is not broadcasting the ssid to employee's. I've read the Cisco Wireless ISR and HWIC Access Point

Configuration Guide but have not been able to find anything about broadcasting the ssid to users. Can someone give me a hint on adding this function?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Cisco 2821 with HWIC-AP-G-A module

Hi Darron,

In order to enable guest mode (Broadcast SSID) on an SSID, type this command on the AP in global configuration mode:

Ap#dot11 ssid ssid-string

Ap#guest-mode

From this doc;

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: Cisco 2821 with HWIC-AP-G-A module

Hi Darron,

In order to enable guest mode (Broadcast SSID) on an SSID, type this command on the AP in global configuration mode:

Ap#dot11 ssid ssid-string

Ap#guest-mode

From this doc;

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml

Hope this helps!

Rob

410
Views
0
Helpful
1
Replies