Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco 350AP - What happened?

Hi all,

What happen to my Cisco 350 AP as below?

*********************************

Testing DRAM...

(press <esc> to bypass)

DRAM OK

Power-on reset.

Copyright 1996-2000 Cisco Systems, Inc.

Copyright 1984-2000 Wind River Systems, Inc.

System ID: 0040965ABFA5

Motherboard: MPC855 50MHz, 8192KB FLASH, 16384KB DRAM, Revision B0

Bootstrap Ver. 1.09: FLASH, CRC 710B6415 (OK)

Initialization: OK

Memory Bank total used left

DRAM 16738168 0 16738168

Config 524288 212 524076

FLASH 7733248 4291344 3441904

Memory Bank:File address size encoding type flags

a) Config:AWC_ConfigDB FE020000 212 AiroDB1 Data 0000

b) FLASH :IOS_Upgrade 1.0 FE0A0000 393268 none Exec 0801

c) FLASH :IOS_C350_BOOT 2 FE100034 393256 none 0x09 0800

d) FLASH :IOS_C350_TAR 2 FE16005C 3467304 none 0x0A 0800

e) FLASH :IOS_Upgrade_Envs 1.0 FE4AE884 136 none 0x0C 0800

f) FLASH :AWC PCMCIA FPGA 0.14 FE4AE90C 37380 none FPGA 0000

Cisco IOS automatic field upgrade image, ESC to terminate

..10....9....8....7....6....5....4....3....2....1..

upgrade: Compare ok first load file 0

upgrade: Compare ok first load file 1

upgrade: Compare ok first load file 3

upgrade: IOS Configuration component not available

upgrade: Invalid or missing installation key (BR350 not supported)!

Depress ESC key to reboot

**********************************

Please let me know what happen and how I could recover it.

Thanks a lot

Regards,

Ron

2 REPLIES
Community Member

Re: Cisco 350AP - What happened?

Where you trying to upgrade the IOS with bridge firmware (BR350). That is your last error message.

Community Member

Re: Cisco 350AP - What happened?

I got this error after I upgrade to IOS for this AP350. This was the only error message I got.

Thanks!

135
Views
0
Helpful
2
Replies
CreatePlease to create content