01-05-2014 12:44 AM - edited 07-04-2021 11:53 PM
Hi Guys,
I have 2* cisco 5508 WLC in HA mode . Both are running IOS 7.5.102.0 . Everything is working perfectly fine.
I need to Creat 3 differnet SSID and Creat 3 different login Pages for them . Each user from respective SSID will get specified login Page. like
I have few questions :
1) I have downloaded webauth bundle from cisco Support Site and in that itself so many files are there. So based on my scenario , in which folder do i need to copy my login and logo file.
2) i have used Picozip to convert the file in .tar format but its giving me following error "
% Error: Webauth Bundle file transfer failed - No reply from the TFTP serve" but i can ping my tftp server easliy.
3) As Controllers are in HA mode , so once i am successful in uploading webauth bundle then it will be replicated on secondary controller or do i have to turn off SSO and upload in both one by one.
Please help me out in this.
Cheers
Solved! Go to Solution.
01-08-2014 01:24 AM
This was a bugf in earlier version but not with 7.5:
https://tools.cisco.com/bugsearch/bug/CSCtd66990
Try to chnage this in ur tar file:
01-08-2014 02:06 AM
hi sandeep ,
i tried this but its again n again taking me to same web authentication page.
01-08-2014 02:12 AM
01-08-2014 02:44 AM
Hello Sandeep,
i have uploaded the tar which you have sent to me. When i supply my username and pwd, after that it keeps on going and not showing any end result. so it stays on same page and nothing happening after that.
Are there any more radius ACL's to be defined ? 10.10.13.x is wireless client network , 192.168.10.21 is Radius Server , 192.168.10.215 is proxy server. Is there any other ACL need to be defined ??
-------------------------------------------------------------------------------
Source Destination Source Port Dest Port
Index Dir IP Address/Netmask IP Address/Netmask Prot Range Range DSCP Action Counter
------ --- ------------------------------- ------------------------------- ---- ----------- ----------- ----- ------- -----------
1 Any 10.10.13.0/255.255.255.0 192.168.10.21/255.255.255.255 Any 0-65535 0-65535 Any Permit 0
2 Any 192.168.10.21/255.255.255.255 10.10.13.0/255.255.255.0 Any 0-65535 0-65535 Any Permit 0
3 Out 10.10.13.0/255.255.255.0 1.1.1.1/255.255.255.255 Any 0-65535 0-65535 Any Permit 0
4 In 1.1.1.1/255.255.255.255 10.10.13.0/255.255.255.0 Any 0-65535 0-65535 Any Permit 0
5 Any 10.10.13.0/255.255.255.0 192.168.10.215/255.255.255.255 Any 0-65535 0-65535 Any Permit 98
6 Any 192.168.10.215/255.255.255.255 10.10.13.0/255.255.255.0 Any 0-65535 0-65535 Any Permit 98
DenyCounter : 12
01-08-2014 03:02 AM
Are you using External webauth then only u need ACL???
If not then remove ACL and try again.
Authentication priority order for web-auth user should be RADIUS.
WLAN>edit then click on Security >AAA server here Order Used For Authentication only Radius(remove other LADP ..or move to left side)
01-08-2014 10:58 PM
Hello Sandeep,
The order is Radius Server only.
Thanks,
Hussain
01-08-2014 11:06 PM
Can u try with internal Web page from WLC . This is just for Test ....
Don't use custmized webpage for Test and Let me know the results.
Regards
Sent from Cisco Technical Support iPhone App
01-08-2014 11:15 PM
Hi Sandeep,
Its working now.. I just clear the Radius Server Overwrite interface.. and it started working.
Thanks for your great helpl.
01-08-2014 11:18 PM
Hi Sandeep,
I can confirm, both Internal and Customizable web page working fine by having Radius Server Overwrite interface UnChecked
Thanks,
Hussain
01-08-2014 11:22 PM
Glad that finally u resolved ur problem.
Great..post---Waqas,
Reagrds
Dont forget to rate helpful posts and mark this question as aanswered.
01-09-2014 07:12 AM
Dear Sandeep and scott,
Thanks for your help in solving this issue.
Really appreciated...
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: