Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Cisco 877W and 802.11b

Hi,

i'm trying out an 887w router but can't for the life of me figure out how to get the wireless running 802.11b. Before you ask why its so i can get PDAs connected.

thanks in advance

Charlie

1 REPLY
Hall of Fame Super Red

Re: Cisco 877W and 802.11b

Hi Charlie,,

I am not really familiar with the 877w but have you enabled any 802.11b Data Rates (1.0, 2.0, 5.5, and 11.0)?

Enter 1.0, 2.0, 5.5, and 11.0 to set these data rates to enabled on the 802.11b, 2.4-GHz radio.

From this good doc;

Capacity Coverage & Deployment Considerations for IEEE 802.11g

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_white_paper09186a00801d61a3.shtml

Hope this helps!

Rob

136
Views
0
Helpful
1
Replies
CreatePlease to create content