Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

Dear Experts,

I am trying to upgrade the AIR-AP1252AG-A-K9 to LWAPP. I have the tftp server ready with IOS c1250-rcvk9w8-tar.124-21a.JA2.tar

when I enter the following archive comman, I get an error

archive download-sw /f /0 tftp://10.10.2.10/c1250-rcvk9w8-tar.124-21a.JA2.tar

% Invalid input detected at '^' marker.

here is the show version output

ap#sh version

Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(10b)JA1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.

Compiled Wed 30-Jan-08 12:04 by prod_rel_team

ROM: Bootstrap program is C1250 boot loader

BOOTLDR: C1250 Boot Loader (C1250-BOOT-M) Version 12.4(18a)JA1, RELEASE SOFTWARE (fc1)

ap uptime is 3 hours, 8 minutes

System returned to ROM by power-on

System image file is "flash:/c1250-k9w7-mx.124-10b.JA1/c1250-k9w7-mx.124-10b.JA1"

Please help.

Everyone's tags (4)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Silver
VIP Purple

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

Hi Mohammed,

For the LWAP conversion, use the recovery image ( e.g  c1250-rcvk9w8-tar.124-21a.JA2.tar). We can use the same command on the autonomous AP priviledge mode.

AP#archive download-sw /force-reload /overwrite tftp://10.10.10.1/c1250-rcvk9w8-tar.124-21a.JA2.tar

Try this .

Regards

Dont forget to arte helpful posts.

8 REPLIES
Hall of Fame Super Silver

Re: Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

I don't see where it's marking an error. Try the /r /o

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

Thank you so much for your reply.

Please find the screen shot with the command error. It doesnt seem to recognise the command parameter download-sw.

Here is the commands I tried.


archive download-sw /f /0 tftp://a.b.c.d/c1250-rcvk9w8-tar.124-21a.JA2.tar

archive download-sw /overwrite /reload tftp://a.b.c.d/c1250-rcvk9w8-tar.124-21a.JA2.tar

archive tar /x  tftp://a.b.c.d/c1250-rcvk9w8-tar.124-21a.JA2.tar flash:

(a.b.c.d is just for hiding the actual ip)

Thanks.

Hall of Fame Super Silver

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

Thank you for your valuable comment. I will try them on the AP and get back to you.

I really honour your efforts and will rate your comments as I complete with the commands.

Regards,

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

I was actually trying to convert it from Autonomous to LWAPP.

Thanks.

VIP Purple

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

Hi Mohammed,

For the LWAP conversion, use the recovery image ( e.g  c1250-rcvk9w8-tar.124-21a.JA2.tar). We can use the same command on the autonomous AP priviledge mode.

AP#archive download-sw /force-reload /overwrite tftp://10.10.10.1/c1250-rcvk9w8-tar.124-21a.JA2.tar

Try this .

Regards

Dont forget to arte helpful posts.

Hall of Fame Super Silver

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

The mode button can be used to convert either way.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

Cisco AIR-AP1252AG-A-K9 upgrade to LWAPP

Thanks so much Scott and Sandeep.

It worked fine.

Regards.

719
Views
5
Helpful
8
Replies
CreatePlease to create content