09-11-2014 02:04 AM - edited 07-05-2021 01:30 AM
We having 8 AIR-SAP2602I-E-K9 and one cisco 2504 wireless controller with image 7.4.100.0 .Is these access points can join the controller automatically or either it need a image conversion.
Which image version is compatible
This is the current image version running in Access point
09-11-2014 05:18 AM
Hi Sajad,
These AP need the 7.2.110.0 image on WLC and you have higher then this.
So dont worry they will join to WLC.
Make sure AP get the IP address and there is one method configured to findout the WLC.
Regards
Dont forget to rate helpful posts
09-23-2014 02:07 PM
Please refer the following matrix.
Note The Cisco 3600 Access Point was introduced in Release 7.1.91.0. If your network deployment uses Cisco 3600 Access Points with Release 7.1.91.0, we highly recommend that you upgrade to Release 7.2.103.0 or a later release. | |||
-A and N: 4.1.190.1 or 5.2 or later1 | |||
10-08-2014 01:57 AM
correct answer
10-08-2014 02:10 AM
Hi Saad,
Mark the question as answerd, it may help others.
Regards
09-23-2014 09:59 PM
Sandeep is correct. Also, since you posted a model type of an autonomous/"s"tandalone 2600 ("S"AP2602I), vs the lightweight/"C"apwap version (CAP2602I), you may need to validate the version of code running on the AP if it does not appear to be joining.
In your screenshot, the image file ap3g2-k9w"8" indicates a lightweight version ready to join your WLC. If you find an ap3g2-k9w"7", this is the autonomous/standalone image and will not join a WLC without being converted to lightweight.
There are several threads on this process, such as this http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide