Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco Aironet 3600e LWAPP to Autonomous AP conversion

I recently erased all the files in the flash memory for a Cisco Aironet 3600e Access Point so that i could convert it from LWAPP IOS to Autonomous IOS.  The access point is booting to ROMMON mode i have tried to copy the IOS from a tftp server but every time i get a connection time out error. Could i have done something wrong to erase all the files in flash memory. What can i do to load the ios to the access point i have tride everthing but im getting the error below while using tftpd32

examining image...

DPAA Set for Independent Mode

DPAA_INIT = 0x0

%Error opening tftp://23.35.64.106/ap3g2-k9w7-152-2.JB.tar (connection timed out)ap:

4 REPLIES
Hall of Fame Super Gold

Cisco Aironet 3600e LWAPP to Autonomous AP conversion

New Member

Cisco Aironet 3600e LWAPP to Autonomous AP conversion

Please check the Windows Firewall in your TFTP server.

New Member

Re: Cisco Aironet 3600e LWAPP to Autonomous AP conversion

And you have to change the IOS file name and extension.

ap3g2-k9w7-152-2.JB.tar -> ap3g2-k9w7-tar.default

VIP Purple

Re: Cisco Aironet 3600e LWAPP to Autonomous AP conversion

Here is a example for how to do this conversion using AP mode button. This may be useful to you

http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/

HTH

Rasika

**** Pls rate all useful resposes *****

813
Views
0
Helpful
4
Replies
CreatePlease to create content