Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Aironet 3602I is stand alone or need a controller ????..

Hello,

          Can any help me with this questions ?...thanks you.

Cisco Aironet 3602I  is stand alone or need a controller ????..

David Chavarria

8 REPLIES
Silver

Cisco Aironet 3602I is stand alone or need a controller ????..

3602's need a controller.

Cisco Aironet 3602I is stand alone or need a controller ????..

3602 is designed to work with the WLC, as is the 3500.  Any AP with Clean Air needs to be joined to the WLC to gain the Clean Air functionality.

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered

Cisco Aironet 3602I is stand alone or need a controller ????..

You also need code 7.2, which means you need a new 2504, 5508 or WISM2. Will not work on older controllers.

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________

Cisco Aironet 3602I is stand alone or need a controller ????..

in General APs can be converted to work with autonomous (standalone) image or an LWAPP/CAPWAP image that needs controller.

for 3600 series APs however there are no support for autonomous image and you can only use it on WLC with version 7.2 or above (7.0 does not work).

7.2 version does not work on all WLC platforms and only works on new platforms like WiSM2 and 2500 WLCs.

I think everyone above mentioned what I wrote but I just tries ot make a good summary.

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"
New Member

Cisco Aironet 3602I is stand alone or need a controller ????..

Do you know if there is an autonomous image for this, we were asked to perform a site survey with this model , but we dont want to be carrying WLC to do this,

Thanks

Cisco Aironet 3602I is stand alone or need a controller ????..

No. There is no autonomous image.

Rating useful replies is more useful than saying "Thank you"
New Member

Cisco Aironet 3602I is stand alone or need a controller ????..

I'd be interested to hear how others have done site surveys with these units, as it does make it hard without an autonomous image.

Hall of Fame Super Silver

Cisco Aironet 3602I is stand alone or need a controller ????..

This was the same issue when the 3500's came out until people found out you can use the 1260 image.  What I have seen in the field is using a 2504 and a power pack to power up the 2504.  It would be the same if you would have to survey for mesh.

-Scott
*** Please rate helpful posts ***
5632
Views
0
Helpful
8
Replies
CreatePlease login to create content