Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco Aironet AP 1600i & Motorola HandHeld

Hello;

 

I have a CISCO Aironet AP 1600i with an Autonomous IOS & a Motorola HandHeld MC3190 runs Windows Mobile 6.5 Classic.

I tried to connect the HandHeld with the AP but failed, It keeps trying to connect but with no success..

 

Do you know how can I fix this issue, please?

 

I am really lost!

16 REPLIES
Bronze

Hello Mounir,Is it only

Hello Mounir,

Is it only Motorola HandHeld MC3190 that doesn't connect?

Did you try any other device?

For configuration please refer: http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3.html

New Member

Hello Moin Ilyas; Yes, only

Hello Moin Ilyas;
 

Yes, only Motorola HandHeld MC319ZEU (I tried 2 of them same Issue). It Is the only device that runs Windows Mobile 6.5 Classic. The other devices are fine (Android, Windows 7, Windows 8 "PC").

Bronze

Hello Mounir, What

Hello Mounir,

 

What authentication are you using to authenticate clients?

Try to keep it to Open Authentication and share results.

Thanks.

New Member

Hello;

Hello; It is already an opened authentication... (Thank you so much for your helpful efforts that we appreciate).
VIP Purple

Pls attach your AP

Pls attach your AP configuration to have a look

Rasika

VIP Purple

Pls access the AP vial CLI &

Pls access the AP vial CLI & get the "show run " output in text file format. That is easy to read & understand how it configured.

 

HTH

Rasika

New Member

Hello;Here Is the output text

Hello;

Here Is the output text:

 

 

CiscoAP1600i>en
Password:
CiscoAP1600i#show run
Building configuration...

Current configuration : 1779 bytes
!
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname CiscoAP1600i
!
!
logging rate-limit console 9
enable secret 5 $1$j7Lx$Xsw7dDi8Mva4nb9FuUgwq0
!
no aaa new-model
no ip source-route
no ip cef
!
!
!
!
dot11 syslog
!
dot11 ssid Cisco2
   authentication open
   guest-mode
!
dot11 ssid Cisco5
   authentication open
   guest-mode
!
!
!
!
!
username CISCO password 7 096F471A1A0A
!
!
bridge irb
!
!
!
interface Dot11Radio0
 no ip address
 !
 ssid Cisco2
 !
 antenna gain 0
 stbc
 beamform ofdm
 station-role root
 no dot11 extension aironet
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
 no ip address
 !
 ssid Cisco5
 !
 antenna gain 0
 peakdetect
 no dfs band block
 stbc
 beamform ofdm
 channel dfs
 station-role root
 no dot11 extension aironet
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
 no ip address
 duplex auto
 speed auto
 bridge-group 1
 bridge-group 1 spanning-disabled
 no bridge-group 1 source-learning
!
interface BVI1
 mac-address fc5b.3937.1604
 ip address 192.168.1.3 255.255.255.0
 ipv6 address dhcp
 ipv6 address autoconfig
 ipv6 enable
!
ip default-gateway 192.168.1.1
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
 login local
 transport input all
!
end

VIP Purple

Did you try with different

Did you try with different IOS version to see the behavior is same ? I would do that as configuration is pretty basic,cannot think of any issues with that

HTH

Rasika

**** Pls rate all useful responses ****

New Member

Hello; If you mean the

Hello;

 

If you mean the Lightweight and Autonomous, I have tried both of them but no positive result. Same thing.. the HandHeld failed to connect to the AP.

 

I am loosing my mind.. What about the CCX thing? I read an article said that I have to disable the CCX Extensions for a WlanID.. What do you say?

 

http://forum.xda-developers.com/showthread.php?t=350206&highlight=cisco

VIP Purple

HI, I mean different code of

HI,

 

I mean different code of Autonomous code (like ap1g2-k9w7-tar.152-4.JB6.tar).

Is it possible to take a wireless packet capture on the 2.4GHz frequency this AP operates when client is trying to connect. That will tell us exact reason why client cannot associate to your network.

 

HTH

Rasika

**** Pls rate all useful responses ****

 

 

New Member

Manannalage rasika Nayanajith

Manannalage rasika Nayanajith;

There Is different versions, you are right, I used only the last one.

Excuse me, would you please explain to me the last Idea you said? I did not get It well.. Or show me steps/example how to do that.

If this last solution won't help I will try the different codes..

 

Thanks In advance.

--

Cordially

Hall of Fame Super Gold

What method are you using to

What method are you using to connect to WiFi?  Do you have Fusion installed?

 

See THIS.

New Member

Leo Laohoo; Unfortunately, I

Leo Laohoo;

 

Unfortunately, I am using the same method shown on the video. When I click on connect It just keep trying to connect showing : connecting then unavailable then connecting.... and so on.

Hall of Fame Super Gold

How many are working and how

How many are working and how many have failed?

New Member

I have 4 Motorola HandHeld

I have 4 Motorola HandHeld MC319 all of them have same issue with Cisco. (I have tried 3 same Cisco AP and still have the same matter)
 

287
Views
0
Helpful
16
Replies
CreatePlease to create content