Cisco Aironet FW 15.2 Does not work with Non-Cisco Media Bridges
I have a Cisco Aironet 1142i that was just updated from 12.4(23c)JY to 15.2(4)JA1 (don’t think model matters as the issue seem to be the firmware) and now I cannot get my media bridges (3 different ones) to either connect to the 1142 AP or obtain and pass the DHCP addresses to other device connected to the built in switch. If I reload the 1142 AP firmware to 12.4, than this works fine. I have not seen anything in the release notes that changed how this works or if there is I could not find it.
Does anyone know why this changed and if there is any settings that I need to enabled / disable?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...