Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Ap1242 with Linksys Wet54g ethernet bridge

Hi to all!

Can i use any ascii key as wpa2-psk?

When i try to use some ascii keys the linksys bridge does not authenticate with the Ap. Reading the Ap log it says "authentication failed".

What could it be the problem? (they both have the same PSK (ascii)).

Why's that?

Is there any incompatibility with some ascii characters between this two devices?

e.g. 190oWh@.78#793mFj#,sd@com

Thanks in advance

3 REPLIES
Silver

Re: Cisco Ap1242 with Linksys Wet54g ethernet bridge

AP allows only association of Workgroup Bridges as their client not the bridge itself. Check if you ahve configured the bridge in Workgroup bridge mode.

New Member

Re: Cisco Ap1242 with Linksys Wet54g ethernet bridge

I think that is not a configuration problem. Without any security policy (wep, wpa) i can connect to the Ap.

Anyway, if i put a simple key (for example: 12345678) i can connecto to the ap. The problem is when i configure the psk with some ascii characters (for example: @#).

thanks for your help.

New Member

Re: Cisco Ap1242 with Linksys Wet54g ethernet bridge

I am having same thing. COuld not find any firmware update.

172
Views
0
Helpful
3
Replies
CreatePlease login to create content