I've got a CB21 Card PCI card with Windows XP using the ADU client. When the laptop boots and the card is installed it hangs for several minutes at the "Preparing Network Connections" screen. This only happens when the ADU client is set to use the Windows Username / Password for the 802.1x authentication.
I do not have this problem when any of the following is true:
- The card is removed.
- The ADU client is set to use a static username / password.
It is not recommened to have client utilities on a single client PC. If you are using ADU, better disable the Microsoft WzC service from the computer services. So that this will not run during the next bootup and ADU will be the only running client utility on your PC.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...