The Cisco parser ignores lines that start with !. So if you create a config on a computer somewhere for input to a router via TFTP or cut/paste, you can put in all the ! comments you want and they will have no effect on the configuration executed or saved on the router.
When in "Interface configuration mode" you can use the "description" subcommand to add a comment to the interface.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...