We currently have a Spectrum Expert PCMCIA card that works very well and we cannot afford to move over to the USB style analyzers at this time.
My question would be if anyone has sucessfully used a PCMCIA based card with a computer that does not have a PCMCIA or Express card slot.
Most of the newer laptops are not being produced with any type of PC card slots and we had to buy a refurbished systems with a PCMCIA slot - that's only going to work for so long.
I have researched numerous PCMCIA to USB external adapters, but most of those appear to be primarily used for WWAN air cards and appear to be very finnicky. Others that I have found state that they may be used for ATA flash and so on. I really don't know what will/should work with this card.
This model by Synchrotech U111M USB to PC Card Read-Writer
and the Quatech External PC card adapter are the two that I have been researching - they cannot tell me anything about their adapter regarding compatability with the Cisco card.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...