Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco Standalone AP configuration

Hi All,

Ap 1600 radios are automatically disabled if i configure WEP for Shared authentication.What can be the issue..?

1 REPLY
VIP Purple

Cisco Standalone AP configuration

See whether your configurations is done correctly. Below documents may helps you

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080c1e263.shtml

As you know this is not a good security mechanism & you should not configure it unless client only supporting  WEP

HTH

Rasika

**** Pls rate all useful responses ****

159
Views
0
Helpful
1
Replies
CreatePlease to create content