Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Cisco WCS IOS to LWAP conversion "Failure Verifying Radio Role"

Hello!

I am trying to use Cisco WCS to convert a cisco 1231ap from Autonomous to LWAP.

WCS version is: "WCS6.0.132.0"

AP is running "c1200-k9w7-mx.123-8.JEB" so version is good.

"station-role root" is set on radio0

I can see that the wcs connects to the ap with telnet.

I have attatched the logs to this post.

Please give some thoughts. Any suggestions are welcome.

1 REPLY
Silver

Re: Cisco WCS IOS to LWAP conversion "Failure Verifying Radio Ro

I can't really comment on the WCS because I usually use the Cisco conversion tool provided in their wireless downloads section. Have you tried this yet? I've never had major issues with it, though I'd imagine that it would be a pain to use on a large scale. Using it for an AP here or there works great, though.

228
Views
0
Helpful
1
Replies
CreatePlease to create content