11-13-2013 07:08 AM - edited 07-04-2021 01:15 AM
Good Morning everyone,
I'm trying to get a 5508 (foreign) and a 2504 (anchor) on 7.5 to work with AirPlay. It's a single SSID/subnet, nothing to fancy other then the anchor. The anchor is providing the wlan for internet access, while the clients (ipad mini and appletv) are connected via wireless on ap off of the foreign controller.
In mDNS, I can see the Apple-TV.local. being advertised on the foreign controller, but the Ipad does not pick it up.
Anchor/DMZ Controller WLAN Config:
Very basic: wpa2-psk, AVC Profile, WMM, Bronze QoS, Aironet IE, mDNS Snooping ON, mDNS Profile default-mdns-profile.
Interface set for mDNS Profile default-mdns-profile
Foreign Controller WLAN Config
Very basic: wpa2-psk, AVC Profile, WMM, Bronze QoS, Aironet IE, mDNS Snooping ON, mDNS Profile default-mdns-profile. (tried with this off on foreign)
Interface set for mDNS Profile default-mdns-profile (tried with this off on foreign, as it's not the same vlan since it's anchored to a dmz controller)
AppleTV lattest greatest (wireless)
Ipad Mini 7.03 (wireless)
Any ideas?
11-13-2013 08:00 AM
Hmm.. I can't even get this to work on the 5508 with out an anchor, same subnet and wlan.
11-13-2013 08:02 AM
add AirTunes to you mdns profile. I had the same issue and that allowed my devices to see the apple tv.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
11-13-2013 08:56 AM
Steve,
Do you know if this is supported via wired only?
Again, same subnet, not anchored currently. Both wireless, airtunes is added.. now, thanks for that.
mdns profile set on interface and in wlan.. peer to peer blocking is disabled. nothing special on wlan. Do I need anything on the wired side?
I've attached the mdns debug.. I keep seeing wireless not supported in master-db.
11-13-2013 09:30 AM
I had this working with the apple tv on wireless. do you have multicast confiugred and enabled on the WLC?
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
11-14-2013 11:32 PM
I dont think this is supported
Here is the enhancement what we have
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtr26626
Regards
Surendra
11-14-2013 11:37 PM
Just to add
we have to enable GLoab MDNS on the WLC, if we do that then we hit theb elow bug
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCug69382
Regards
Surendra
12-21-2013 07:09 PM
while the clients (ipad mini and appletv) are connected via wireless on ap off of the foreign controller.
//Apple TV should be WIRED on Anchor WLC.
Setup:
w.less ipad client(guest wlan map to mgmt)---AP---Foreign=====Anchor(guest wlan map to vlan10)---switch(Access vlan10)---ATV(wired)
http://www.cisco.com/en/US/docs/wireless/technology/bonjour/Printer_Services.html#wp1056055
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide