I'm trying to get a 5508 (foreign) and a 2504 (anchor) on 7.5 to work with AirPlay. It's a single SSID/subnet, nothing to fancy other then the anchor. The anchor is providing the wlan for internet access, while the clients (ipad mini and appletv) are connected via wireless on ap off of the foreign controller.
In mDNS, I can see the Apple-TV.local. being advertised on the foreign controller, but the Ipad does not pick it up.
Anchor/DMZ Controller WLAN Config:
Very basic: wpa2-psk, AVC Profile, WMM, Bronze QoS, Aironet IE, mDNS Snooping ON, mDNS Profile default-mdns-profile.
Interface set for mDNS Profile default-mdns-profile
Foreign Controller WLAN Config
Very basic: wpa2-psk, AVC Profile, WMM, Bronze QoS, Aironet IE, mDNS Snooping ON, mDNS Profile default-mdns-profile. (tried with this off on foreign)
Interface set for mDNS Profile default-mdns-profile (tried with this off on foreign, as it's not the same vlan since it's anchored to a dmz controller)
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...