cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
963
Views
0
Helpful
20
Replies

Client Connectivity Problem

Prasan Venky
Level 3
Level 3

Hi All,

We observed all the Nexus 5 model mobiles are not able to connect to Wi-fi network. Any changes on the WLC could help to resolve it ..?

Thanks in advance.

20 Replies 20

Yes Mr. scott!!!

Well HA AP SSO wasn't designed for anchor WLC's. This is used for WLC's that have access points joining to them. Redundancy for guest anchoring is done by two licensed WLC with a 12 AP count.

Now I don't think this has anything to do with your issue since you have defined or should I say isolated the issue with a certain device.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Thank you Rasika for your wonderful support in resolving this issue 

Glad to see it worked for you. Thanks for rating as well

Rasika

Yes right AC module not supported on 7.4, it is only supported on 7.5 and later versions.

If you have 7.5.102.0 on both wlcs then you have to run this command.

Reagrds

Scott Fella
Hall of Fame
Hall of Fame

There are open bugs on v7.6 with the 3600's and the 3700's. So your really in a pinch. Your better off staying on v7.5 and adding the command:

config network secureweb cipher-option rc4-preference enable

The open issues with v7.6 is here
https://supportforums.cisco.com/thread/2233768

Your other option is to go with v7.4.121.0 and wait for v7.6 to be fixed, witch will either be a new 7.6.x release of v8.0

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: