First I'll give you the setup. We have 18 3502i's in a one floor environment. We also have two controllers with the AP's split up between them.
We have the need for about 60 IP addresses, so we have configured an interface group with 3 VLAN's to provide the amount of IP's necessary.
We are having an issue where users will lose their IP (DHCP lease), however, they won't deauthenticate from the WLC. This keeps them from being able to get a new ip.
Any ideas besides increasing the DHCP lease timer? My thoughts are that it might be because we don't have the Foreign Maps configured between the two controllers. I didn't think that needed to be configured if the WLC's were on the same subnet. Am I wrong?
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
email@example.com. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...