Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Config guidelines for redundant WiSMs

Dear all,

I need some basic guidelines on how to make WiSMs redundant. Whilst I understand about mobility groups etc.. I seem to have problems with the basics.

Q: Do I need to configure both WiSMs with the applicable WLANs or do the WLANs only need to be defined on the master controller?

Q:Does every WiSM need interfaces in the VLANs linke to the WLANs or does only the master controller need this?

Q: How about mobilty anchors. Do I need to specify both WiSMs as mobility anchors?

Thanks,

--Joerg

1 REPLY
Silver

Re: Config guidelines for redundant WiSMs

Here is the URL for Configuring a Cisco Wireless Services Module and Wireless Control System it may help you :

http://www.cisco.com/en/US/docs/wireless/technology/wism/technical/reference/appnote.html

108
Views
0
Helpful
1
Replies