Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring dual sim on Cisco 819 4G router

  Hi all,

i'm tryinng to configure dual sim failover on a Cisco 4G router (C819HG-4G-G-K9) but i'm not able to.

Single SIM in slot 0 works properly, but i cannot add a second profile for sim in slot 1.

Reading the following document :

http://www.cisco.com/en/US/docs/routers/access/800/819/software/configuration/Guide/C819sw.pdf

seems that "Dual SIM feature is not supported in this release" .... so i'm wondering why a have 2 SIM slots but i cannot use it in the same time!

Is really dual sim not supported or i need any license or configuration?

If it's really not yet supported it will be supported in the future?

This is the output of a "sh inventory" command :

NAME: "C819HG-4G-G-K9", DESCR: "C819HG-4G-G-K9 chassis, Hw Serial#: FCZ17259379, Hw Revision: 6.0"
PID: C819HG-4G-G-K9    , VID: V01 , SN: FCZ17XXXX

NAME: "C819H Mother board on Slot 0", DESCR: "C819H Mother board"
PID: C819HG-4G-G-K9    , VID: V01 , SN: FOC17XXXXXX

NAME: "Modem 0 on Cellular0", DESCR: "Sierra Wireless MC7710 4G-G"
PID: MC7710            , VID: 10 , SN: 359470040XXXXXX

IOS image file is  c800-universalk9-mz.SPA.152-4.M3.bin

I tried tu upgrade IOS image to c800-universalk9-mz.SPA.153-2.T.bin but this not solved the issue.

Thanks in advance

Everyone's tags (5)
5 REPLIES
New Member

Configuring dual sim on Cisco 819 4G router

the following product datasheet:

http://www.cisco.com/en/US/prod/collateral/routers/ps10906/ps380/ps11615/data_sheet_c78-678459.html

confirms me that this router is "Hardware Ready" for dual sim support but there will be  "software support with future IOS release FCS Q3CY2013"

thanks anyway.

Regards

Cisco Employee

Re: Configuring dual sim on Cisco 819 4G router

This feature is not supported yet by IOS. It will be supported with new IOS release which probably released to end of July 2013 till that time you have to wait.

New Member

Configuring dual sim on Cisco 819 4G router

Hi Ravi,

thanykou for reply, i'll wait for new ios release. Reading the datasheet clarified me the question, i just was not able to understand when new ios would be released.

Regards

Cisco Employee

Configuring dual sim on Cisco 819 4G router

Yes, the support was added  in mainline IOS 15.3(3)M or later releases.

Gregor

New Member

Configuring dual sim on Cisco 819 4G router

Was the new IOS version with support of DUAL Sim (i.e. multiple apn profiles) already released?

2225
Views
8
Helpful
5
Replies
CreatePlease login to create content