Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Congested AP Channels

Hey, got a question....I have several 1231 in an area and I can not make due with the 3 channels allowed with 802.11g WLAN. I have the option of throttling one or two back to eliminate the overlap, but I was also wondering if it was possible to turn a few into repeaters to solve the issue. So therefore there's my question, can channel conflicts still exist between AP-root and Repeater-nonroot?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Congested AP Channels

Yes. Both radios will still be in 2.4 GHz space . Do the 1231s have "a" radios? if not, the bridge will be across the same channel

I take it that you are running them in autonomous mode & not using a WLC to control them via LWAPP. You will have to do some tweaking with the channels & power then.

2 REPLIES

Re: Congested AP Channels

Yes. Both radios will still be in 2.4 GHz space . Do the 1231s have "a" radios? if not, the bridge will be across the same channel

I take it that you are running them in autonomous mode & not using a WLC to control them via LWAPP. You will have to do some tweaking with the channels & power then.

New Member

Re: Congested AP Channels

Yes you are correct about being Autonomous mode, I guess I will begin the power tweaking. Thanks!

121
Views
0
Helpful
2
Replies
CreatePlease login to create content