I configured 2 SSID in 1131 Access Point, one of the ssid is having static ip and it is in vlan 1. i connected the AP to CE500 switch, and iam connecting to Fa/2 and which should be trunk, however when i try to trunk the port it is not giving me the option to trunk, i tried using smart ports but of no use. the same setup is working on 2960 switch one SSID is taking static ip and other is through Dhcp, please help me out how to do trunking with CE500 switch.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...