Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

connectivity between devices in mesh

Hi,

What is the ideal way to check connectivity & wireless strength between mesh devices like root acces point and maps, work group bridges.

this is to verify if the devices are able to transmit optimally in case there is any hard obstructing surfaces or sight problems.

Please suggest.

Thanks .

1 ACCEPTED SOLUTION

Accepted Solutions

Re: connectivity between devices in mesh

If you have WCS you can use it. You can check mesh links health.

From WCS go to Monitor->Access Points. then click on your AP name then click on your AP radio type.

see the image below.

If you don't have WCS it will be harder. You can ssh to the AP and issue some commands like:

- show mesh adjacency all.

- show mesh status.

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"
1 REPLY

Re: connectivity between devices in mesh

If you have WCS you can use it. You can check mesh links health.

From WCS go to Monitor->Access Points. then click on your AP name then click on your AP radio type.

see the image below.

If you don't have WCS it will be harder. You can ssh to the AP and issue some commands like:

- show mesh adjacency all.

- show mesh status.

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"
300
Views
0
Helpful
1
Replies
CreatePlease to create content