11-04-2013 04:43 PM - edited 07-04-2021 01:12 AM
Hi,
I heve problems with clients connected to the wireless network, the network disconnect and reconect them or they suffer low signal even when there are several APs, I found this log on the wireless lan controller
Warning: Our AP with Base Radio MAC XX:XX:XX:XX:XX:XX is under attack (contained) by another AP on radio type 802.11b/g
How can I counteract this effect?
Solved! Go to Solution.
11-06-2013 05:24 PM
Can you determine what is the MAC address of the AP that is attacking you?
11-04-2013 08:36 PM
Maybe your neighbors need a visit from you. That message is telling you that they have containment enabled on their AP's which basically is a DOS.
Sent from Cisco Technical Support iPhone App
11-06-2013 05:24 PM
Can you determine what is the MAC address of the AP that is attacking you?
11-11-2013 11:48 AM
I don´t know how to determine the attacker´s mac address, I don´t see any mac in the WLC and Prime contain logs, does any body know how to get the mac?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide