Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

controller: WLC2106 accesspoint: AIR-CAP1602I-E-K9

Hi,

we have a cisco wireless controller: WLC2106 running software version 7.0.235.0

We recently bought two new accesspoints: AIR-CAP1602I-E-K9

My reseller said they should be compatible with each other.

But when i connect them i receive these errors:

                 

*Mar  1 00:13:18.575: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Mar  1 00:13:18.575: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.3.4
*Mar  1 00:13:18.575: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'ITDS-WLC2106-01'running version 7.0.235.0 is rejected.
*Mar  1 00:13:18.575: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:13:18.575: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:13:18.575: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
Not in Bound state.
*Mar  1 00:13:33.571: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar  1 00:13:36.579: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Mar  1 00:13:36.647: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 172.16.3.112, mask 255.255.255.0, hostname AP4c00.829a.37ef

*Mar  1 00:13:44.571: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar  1 00:13:54.571: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'ITDS-WLC2106-01'running version 7.0.235.0 is rejected.
*Mar  1 00:13:54.571: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:13:54.571: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:13:54.571: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Mar  1 00:13:54.571: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.3.4
*Mar  1 00:13:54.575: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'ITDS-WLC2106-01'running version 7.0.235.0 is rejected.
*Mar  1 00:13:54.575: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:13:54.575: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:13:54.575: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
AP4c00.829a.37ef#
*Mar  1 00:14:04.575: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'ITDS-WLC2106-01'running version 7.0.235.0 is rejected.
*Mar  1 00:14:04.575: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:14:04.575: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:14:04.575: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Mar  1 00:14:04.575: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.3.4
*Mar  1 00:14:04.575: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'ITDS-WLC2106-01'running version 7.0.235.0 is rejected.
*Mar  1 00:14:04.575: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:14:04.575: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:14:04.575: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Mar  1 00:14:14.571: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'ITDS-WLC2106-01'running version 7.0.235.0 is rejected.
*Mar  1 00:14:14.571: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:14:14.571: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:14:14.571: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Mar  1 00:14:14.571: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.3.4
*Mar  1 00:14:14.575: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'ITDS-WLC2106-01'running version 7.0.235.0 is rejected.
*Mar  1 00:14:14.575: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:14:14.575: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:14:14.575: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

Does my controller have a software version to old for this accesspoint?

Everyone's tags (2)
2 REPLIES
VIP Purple

Re: controller: WLC2106 accesspoint: AIR-CAP1602I-E-K9

This is not compatible, 1600 series required  min 7.4.x WLC software version

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

2106 series controller only support upto 7.0.x software code. So you have to have 2504 WLC model (as it is the product to replace 21xx WLC)  in order to to support your AP

HTH

Rasika

**** Pls rate all useful responses ****

Gold

controller: WLC2106 accesspoint: AIR-CAP1602I-E-K9

HI Mark,

The Your AP requires v 7.4 code on the WLC.

Please have a look at below url under heading "Table 4     Controller Software Releases and the Supported Access Points" and you can see the AP1600 is listed from WLC Software version 7.4 only.

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Hope that helps

Regards

Najaf

Please rate when applicable or helpful !!!

1468
Views
0
Helpful
2
Replies
CreatePlease to create content