Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Convert single MSE 7.5 to HA mode

Hi All,

I have a single MSE 7.5 running as a virtual appliance and now want to install a second MSE

to provide HA, what would be the best way to go about this without losing data.

My initial thoughts  were either to upgrade to 7.6 and during the process configure the High Availability option

or to re-run the setup script on the primary and see if the option for HA appears and go from there and then upgrade to 7.6

My ultimate goal is to have HA with 7.6 VA.

Any thoughts much appreciated.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Convert single MSE 7.5 to HA mode

You can always run the setup wizard and configure the HA and then bring up the new HA secondary:

/opt/mse/setup/setup.sh

http://www.cisco.com/en/US/docs/wireless/mse/3350/7.5/Cisco_Connected_Mobile_Experiences/Guide/7_4_MSE_CAS_chapter_0100.html#ID171

If your planning on upgrading your MSE, it might be better to upgrade then run the setup.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
3 REPLIES
Hall of Fame Super Silver

Convert single MSE 7.5 to HA mode

You can always run the setup wizard and configure the HA and then bring up the new HA secondary:

/opt/mse/setup/setup.sh

http://www.cisco.com/en/US/docs/wireless/mse/3350/7.5/Cisco_Connected_Mobile_Experiences/Guide/7_4_MSE_CAS_chapter_0100.html#ID171

If your planning on upgrading your MSE, it might be better to upgrade then run the setup.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
New Member

Convert single MSE 7.5 to HA mode

Thanks for the input Scott, I'll upgrade first.

Hall of Fame Super Silver

Re: Convert single MSE 7.5 to HA mode

No problem. Make sure you do a snapshot if this is a VM:)

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
325
Views
0
Helpful
3
Replies
CreatePlease login to create content