I am trying to convert an AP in Thailand from autonomous to lightweight through WCS. I was able to add the AP as autonomous in WCS, but when I try to convert it to lightweight it always fails on loading recovery image. I have turned on tftp debugging on the access point.
TFTP Event debugging is on
TFTP Packet debugging is on
Apr 28 19:52:05.719: TFTP: Sending read request
Apr 28 19:52:06.073: TFTP: Received block 1, socket_id 0x10EE384
Okay nevermind on this. I tried creating a new migration template with the recovery image linked and it is working now. I think that because I was using an 1100 template and just changing the recovery image it was defaulting back to the 1100 image since I was not saving the template before selecting the AP. It all makes sense to me now.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...