Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Converting LWAP to Autonomous AP

Hi,

I have LWAP 1242-AG. I don't have WLC. I am able to login to AP via console but http access is not happening into that. AP is directly connected with switch.

I want to make it work as autonomous AP by upgrading the image.

From CLI is this possible!!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Converting LWAP to Autonomous AP

Partha,

In the below link - follow the instructions for the section "Converting a Lightweight Access Point Back to Autonomous Mode" :-

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272

HTH>

1 REPLY

Re: Converting LWAP to Autonomous AP

Partha,

In the below link - follow the instructions for the section "Converting a Lightweight Access Point Back to Autonomous Mode" :-

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272

HTH>

297
Views
5
Helpful
1
Replies