Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Customizing Web page

How to customize the web page for the guest authentication in cisco wlc 5508 ..? and also is it possible for customizing the Lobby admin webpage too ..?

Everyone's tags (7)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Customizing Web page

You can custom the WebAuth but not the lobby admin page. You can download a sample WebAuth bundle with various examples from CCO.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
6 REPLIES
Hall of Fame Super Silver

Re: Customizing Web page

You can custom the WebAuth but not the lobby admin page. You can download a sample WebAuth bundle with various examples from CCO.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Customizing Web page

Thank you Mr.Scott.

Is there any support document refering lobby custom is not available..?

KVS

Hall of Fame Super Silver

Customizing Web page

There is no document, because you can't customize it.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
Bronze

Re: Customizing Web page

you can download web auth bundle and modify it then upload it to wlc.

ISE support very limited sponsor portal customization...

Sent from Cisco Technical Support iPad App

New Member

Re: Customizing Web page

Thanks for your response

We are not using ISE as of now. I have uploaded the bundle to the WLC and i could see the customized web page. But the logo is not shown in that web page. But i have kept that .JPG file also inside the .tar file. In cli it shows like "Custome web logo... NONE"

Any clue why it is not shown ..?

KVS

Message was edited by: Prasan Venky

New Member

Re: Customizing Web page

It worked finally... Created .tar file again and modified extension .JPEG to .jpg...

Thanks everyone for the support !!

224
Views
0
Helpful
6
Replies
CreatePlease to create content