Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Data and Control Path down in same subnet

hello,

I have a small problem with the construction of a mobility group.

My network consists of two WLC ( 5508 and 2504) Ver 7.6.100

If I create the mobility group , the data and control path doesn't come up. The two controllers has management interface in the same subnet.

So very flat the installation...
 

Ping work, Mping don't work.

Has anyone an idea ?

Greeting from Germany

Juergen

4 REPLIES

can you post the output of

can you post the output of "show mobility summary" from both the controllers?

 

--

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
VIP Purple

Check whether both WLC

Check whether both WLC configured with same virtual IP address as well

HTH

Rasika

*** Pls rate all useful responses ****

New Member

The problem has been solve by

The problem has been solve by uncheck " new mobility"

VIP Purple

Thanks for the follow up  &

Thanks for the follow up  & post the resolution you got..

37
Views
5
Helpful
4
Replies