Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DHCP for LAN and WLAN

<p>My problem is to get an IP with the WLAN-Clients. They could connect but didn't become a dhcp-lease.</p>

<p>I've looked in all the other posts for dhcp, but couldnt locate my problem.</p>

<p>Any help is welcome. Config is attached.</p>

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: DHCP for LAN and WLAN

So if the wireless clients get associated to the AP and they do not get a valid IP Address (range of 192.168.10.200 to 192.168.10.210), what IP Address(es) are they getting?

If they are not getting the default 169.x.x.x IP Address then there could be a DHCP server nearby? If the answer is yes (that they are getting a valid IP Address from a nearby DHCP Server), IP Helper Address?

8 REPLIES
Hall of Fame Super Gold

Re: DHCP for LAN and WLAN

So the clients get associated to the wireless AP but can't get ip addresses from 192.168.10.200 to 192.168.10.210?

New Member

Re: DHCP for LAN and WLAN

thats right

Hall of Fame Super Gold

Re: DHCP for LAN and WLAN

So if the wireless clients get associated to the AP and they do not get a valid IP Address (range of 192.168.10.200 to 192.168.10.210), what IP Address(es) are they getting?

If they are not getting the default 169.x.x.x IP Address then there could be a DHCP server nearby? If the answer is yes (that they are getting a valid IP Address from a nearby DHCP Server), IP Helper Address?

New Member

Re: DHCP for LAN and WLAN

The Client doesn't get an IP and the only dhcp server is on the router.

Could it be that i've to diable the ip inspect ?

Carsten

New Member

Re: DHCP for LAN and WLAN

Could it be that my problem is thatt I use the 12.4.(20)T1 ?

I found : http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=Firewalling&topicID=.ee6e1fa&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc19d50

but I don't understand where to fix my problem.

New Member

Re: DHCP for LAN and WLAN

Hi,

I am having the same issue with a new 1231 AP. It gets a windows (local) IP of 169.x.x.x.

Silver

Re: DHCP for LAN and WLAN

Try adding the bridge-group 1 command to your Dot11Radio0.1 subinterface. I've seen this problem before and it generally relates to bridge-groups.

New Member

Re: DHCP for LAN and WLAN

Thats was the problem, thanks jeff.

I changed the config in:

interface Dot11Radio0

no ip address

!

encryption vlan 1 mode ciphers tkip

!

broadcast-key vlan 1 change 45

!

!

ssid Carsten

!

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

channel 2462

station-role root

rts threshold 2312

no cdp enable

!

interface Dot11Radio0.1

encapsulation dot1Q 1 native

no cdp enable

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 spanning-disabled

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

and its working fine.

237
Views
5
Helpful
8
Replies
CreatePlease login to create content