Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DHCP issue when using 3rd Party Bridge

I have a WLC 4404 running 4.1.192.22M(Mesh). I have 20 1522's currently and all seems to be working great until I try to connect a client through a bridge device. The end device cannot obtain an IP address via DHCP, the request goes out, but the response is never received.

The bridge device is functioning correctly because if I assign a static IP to the client in the correct subnet it passes traffic no problem.

I've looked at the workgroup bridge functionality but that looks like it only works when using a cisco device on the 'client' end. In my application (WISP) I don't want or need Cisco AP's at every client location.

It doesn't make sense to me why a 3rd party bridge will work fore seemingly all traffic accept DHCP assignments. Any help would be appreciated.

I have read many posts on these forums that discuss this same subject but none seem to have definitive answers.

131
Views
0
Helpful
0
Replies