I need to add a new SSID/VLAN to my existing access points. These already have 2 SSID/VLANs on them and are working fine.
My problem is that for the new SSID/VLAN I need to use 802.1x authentication and for that to work the Access Point needs to talk to a Radius server, which is not on the Access Points Subnet. The Access point will need to talk to the Gateway on the new SSID/VLAN, which is different to the existing Gateway, used for the existing SSID/VLANs on the Access Point.
Is there any way of adding a new Gateway (IP address?) for the new Vlan, like you can with a switch?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...