different VLAN for flex-connect with centralied controller
is there an option to define VLANs for the flex-connect SSIDs per location?
Here's my example:
Central WLC --- SSID "WIFI-1" --- WLC Interface VLAN 99
I want to use on the spoke locations other VLANs than I defined in the Central WLC
Location-1 SSID WIFI-1, VLAN22
Location-2 SSID WIFI-1, VLAN33
In the moment I configure it manually and sometimes the VLAN has changed unpredictable, I know there are some BUGs in the code we use, but that was never a big issue 7.4.x . But is there an option where I can decide that spoke location 1 or 2 has to use VLAN 22 or 33 for his flex-connect APs?
I don't see that in ACL or flex-connect group seetings or somewhere.
For me that would be a very useful option for a centralized desing which works very well in our enviroment, we have just a bunch of WLCs per region like Europe, Asia, Amerika...(except one VoIP location)
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...