Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Disable EAP Authentication for Web-Auth on WLC

Hello Everyone

We Use a Special Radius Server who is implemented according to RFC 2865.  But now we get Errors that the Radius Server cant handle the Attribut Typ 80.

For that i now this Attribut has to do with EAP Authentication, which is a newer addition according to RFC 2869.

How can i configure the WLC to disable EAP Authentication?

Thank you in advance

Chris Kaiser

2 REPLIES
Hall of Fame Super Silver

Re: Disable EAP Authentication for Web-Auth on WLC

EAP authentication is defined on the SSID... So if your using radius to authenticate WebAuth users, then you need to make sure that you use open authentication with WebAuth. Don't specify any layer 2 encryption methods and the WLC will not send EAP request to the radius server.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Re: Disable EAP Authentication for Web-Auth on WLC

Hello

thats what i have allready configured.

layer 2 security is None.

only thing i can choose is None + EAP Passthrough. But with that i cant define any layer 3 security settings.

305
Views
3
Helpful
2
Replies