Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Disable Led on Access Point Autonomous

Hi

I need disable led on accesspoint autonomous cisco 2602e

Regards

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: Disable Led on Access Point Autonomous

Try this & see

AAP1(config)#led display ?

  dim  Turn LED display dim.

  off  Turn LED display off.

HTH

Rasika

**** Pls rate all useful responses *****

4 REPLIES
VIP Purple

Re: Disable Led on Access Point Autonomous

Try this & see

AAP1(config)#led display ?

  dim  Turn LED display dim.

  off  Turn LED display off.

HTH

Rasika

**** Pls rate all useful responses *****

New Member

Re: Disable Led on Access Point Autonomous

Hi rasikanayanajith

Thanks for your request

This command apply for Cisco Access-Point 2602 but Do you know the command for Cisco Access-Point 3602e.

I tried apply this command and not work

Regards.

VIP Purple

Re: Disable Led on Access Point Autonomous

Does this 3602e is in Autonomous mode as well or is it managed by a WLC ?

If it is manged by WLC you have to do this via WLC

(WLC) >config ap led-state disable

If it is autonomous mode, let me know the code version to check & see

HTH

Rasika

**** Pls rate all useful responses ****

New Member

Re: Disable Led on Access Point Autonomous

Hi rasikanayanajith

All access-point are 2602e but had different IOS version. The command LED DISPLAY OFF is correct, but depend of IOS version.

Regards.

2178
Views
0
Helpful
4
Replies
CreatePlease to create content