I have setup an AP1200 and client with DLink DWL-650. AP's authentication is setup as 128bit with shared key. The client is running windows 2000. The client can connect with the AP and this is verified by looking at the AP's log, I can see the IP address of the client given by a DHCP server and it shows that the client is authenticated and associated.
The problem is when I do a test (ping) from the AP to the client and vice versa it fails. Or if I ping the client from anywhere in my network it also fails.
Did I configure the AP correctly? Or do I need to do something else.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...