Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

dot11_mgmt: dot11_mgmt_sta_err_stats_update, null sta_ptr

Hello guys,

Have you ever seem this error ?

dot11_mgmt: dot11_mgmt_sta_err_stats_update, null sta_ptr

I didn't find anything in google or cisco.

Thanks,

- - - - show logging - - - -

Oct 23 10:32:46.182 edt: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down

Oct 23 10:32:46.184 edt: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

Oct 23 10:32:47.181 edt: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

Oct 23 10:32:47.302 edt: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

Oct 23 10:32:47.307 edt: dot11_mgmt: dot11_mgmt_sta_err_stats_update, null sta_ptr

Oct 23 10:32:47.307 edt: dot11_mgmt: dot11_mgmt_sta_err_stats_update, null sta_ptr

Oct 23 10:32:47.307 edt: dot11_mgmt: dot11_mgmt_sta_err_stats_update, null sta_ptr

Oct 23 10:32:47.308 edt: dot11_mgmt: dot11_mgmt_sta_err_stats_update, null sta_ptr

Oct 23 10:32:47.308 edt: dot11_mgmt: dot11_mgmt_sta_err_stats_update, null sta_ptr

Oct 23 10:32:47.308 edt: dot11_mgmt: dot11_mgmt_sta_err_stats_update, null sta_ptr

Oct 23 10:32:48.302 edt: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up

- - - - - - - - - - - - - - -

- - - - show version - - - -

Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(8)JEC, RELEASE SOFTWARE (fc1)

ROM: Bootstrap program is C1200 boot loader

BOOTLDR: C1200 Boot Loader (C1200-BOOT-M) Version 12.2(8)JA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

cisco AIR-AP1231G-A-K9 (PowerPC405GP) processor (revision B0) with 15138K/1236K bytes of memory.

PowerPC405GP CPU at 196Mhz, revision #

Last reset from reload

1 FastEthernet interface

1 802.11 Radio(s)

- - - - - - - - - - - - - - -

1 REPLY
Bronze

Re: dot11_mgmt: dot11_mgmt_sta_err_stats_update, null sta_ptr

Most of the time, these type of errors fall into one of these reasons, buggy drivers or a actual hacking attempt. What are you using to control your wireless setting on your PC? What type of EAP authentication are you using on your PC? Can you send me a "show tech" from the AP's & also please make sure your linksys drivers are up to date,

from the error messages you are seeing in the AP logs, have you tracked down the clients that these MAC addresses refer to?

504
Views
0
Helpful
1
Replies
CreatePlease to create content