I've a vpn router with a dot11radio card installed. Clients on the wireless network are not able to get url names resolved. They can get to the page by using the ip address in the browser but can't get out otherwise so we know it's a dns issue. I've added the ISP's dns servers to the wireless dhcp pool and also taken them out but nothing helps. Thanks for any assistance to resolve this issue. The sanitized config file is attached.
The only ACLs are for NAT and VPN. The wireless network goes directly out to the Internet and does not need VPN connectivity and this entry "access-list 110 permit ip 192.168.yy.0 0.0.0.255" any should allow NAT. The wireless network is 192.168.yy.0/24.
IntroductionHow to use the Wireless LAN Controller Configuration Analyzer (WLCCA)
Javier Contreras is a Senior Tech Lead for the Wireless Business Unit in Cisco, with over 2 decades of experi...
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...