Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Doubt authentication WLC - WS-SVC-WISM-1-K9

Hello

I have a concern regarding the authentication in my network WLAN, we have a WLC - WS-SVC-WISM-1-K9, which we set up and has a SSID with the WPA parameters policy, WPA Encryption TKIP and Auth Key Mgmt 802.1. x. This authenticates with an ACS server and its time to other external databases. Users connect to the WLAN must be configured in your network card the above parameters, so to deploy a window authentication for the WLAN network service. We want this process to be not so extensive, the WLC can send this configuration to the mobile team and so the user can easily connect

3 REPLIES
Hall of Fame Super Silver

Re: Doubt authentication WLC - WS-SVC-WISM-1-K9

I hope i'm understanding this right..... you have a wireless network and an ssid using wpa/tkip enterprise (802.1x).  You have windows clients and want to be able to setup the users without too much trouble.  Well if you are using windows zero config and your user devices are part of the domain, then you can use GPO to push out the wireless profile which will have the ssid and configurations required to connect to the network.  Let me know if im way off here:)

-Scott
*** Please rate helpful posts ***
New Member

Re: Doubt authentication WLC - WS-SVC-WISM-1-K9

Thank you very much
and if not there GPO, we can make another alternate configuration

Hall of Fame Super Silver

Re: Doubt authentication WLC - WS-SVC-WISM-1-K9

No problem.... GPO is your best bet.

-Scott
*** Please rate helpful posts ***
398
Views
0
Helpful
3
Replies