Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Downgrading from 5.0.148 to 4.2.205

Hello,

I was told that version 5.0 code for the 4402 was not good to run and unfortunately that was the code that came with the new WLC I am installing ... so I want to downgrade to 4.2.205, is there any thing I should know about doing this? This is for a new install so the WLC is fresh out of the box and no APs have joined it.

Thanks!!!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Downgrading from 5.0.148 to 4.2.205

As it's a new install you can go ahead and downgrade, you may then need to reconfigure the ip addressing over again on the 4.2 code as the XML version of the running config may be different.

4 REPLIES

Re: Downgrading from 5.0.148 to 4.2.205

As it's a new install you can go ahead and downgrade, you may then need to reconfigure the ip addressing over again on the 4.2 code as the XML version of the running config may be different.

New Member

Re: Downgrading from 5.0.148 to 4.2.205

Thank you

Hall of Fame Super Gold

Re: Downgrading from 5.0.148 to 4.2.205

Try the 6.0.182.0.

Re: Downgrading from 5.0.148 to 4.2.205

4.2 is much more stable, I wouldnt recommend 6.0 yet.

137
Views
0
Helpful
4
Replies
CreatePlease to create content