Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Error on 1242 AP

To Group :

i have 1242 AG and 3524 inline power POE switch and using poe injector for AP
.My AP was running fine but suddenly

i m getting following error

Mar  1 00:00:23.340: %CDP_PD-2-POWER_LOW: All radios disabled -
LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED WS-C3524-PWR-XL (000a.f4f2.28c1)
*

Mar  1 00:00:23.340:  -Verify the required power-injector is installed on this
port: WS-C3524-PWR-XL(Fas 0/1).
*
Mar  1 00:00:23.341:  -If a power-injector is installed, issue the
command:"power inline negotiation injector installed"


how to resolve it  one thing no anteena install still having error
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Error on 1242 AP

Go "conf t" and then enter the command "power in neg i i".  You'll get an message and at the end is a MAC address.  Next you enter the command "power in neg i ".  Save your config.

Don't forget to rate useful posts.

2 REPLIES
Hall of Fame Super Gold

Re: Error on 1242 AP

Go "conf t" and then enter the command "power in neg i i".  You'll get an message and at the end is a MAC address.  Next you enter the command "power in neg i ".  Save your config.

Don't forget to rate useful posts.

Hall of Fame Super Gold

Re: Error on 1242 AP

Thanks for the ratings! 

1076
Views
0
Helpful
2
Replies
CreatePlease to create content