I've got a warehouse with two 1131 access points, one of which is configured as a wds. a tablet pc running xp tablet os is the only client. the tablet will associate with either access point (one or the other) upon startup but loses association while roaming to the other access point. does the tablet need to run aironet client software to qualify as a leap client device, or is there something else i'm missing?
No this is not a requirement. If WDS is configured properly, the client should roam to the other device without loosing the connection. Can you post the WDS configuration? Want to make sure the configuration is correct.
We actually decided to remove one of the two access points and move the other to be more centrally located. I would have still posted the wds config but the ap was set back to defaults. Thanks for the reply though!
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...