I would like to install the wireless clients without the ACU. I was wondering if all the features of the wireless card still work like:
Limit client power
Limit Link speed
My thinking is that these features are in the firmware so if I am running the latest driver and firmware and let Windows handle the authentication and encription settings then I will not be loosing the features I want. Does anyone know of a way to veiw the status of the card without the ACU installed?
Re: Features of Client without having ACU installed
I would think of the ACU as a "handle" to set various parameters on the NIC. Without ACU, you wont be able to set or limit the power of the card to a value from the default. Nor does any of the other features like radio management, world mode and a hell lot more..work without enabling them using the ACU. I think, atleast you will have to write a software interface of your own to enable/disable these features.
An easy way to see the status of the card is to use the LEDs on the card.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...