Firmware OEAP 602

[Andress]

Hello everyone,

I have an AP 602 that I used for my lab tests, for some reason that damages the firmware and now there is no load, and only I shows the screen to load a new firmware, the case is that I searched everywhere and did not achieve, Of course I know that he is already standing, but there will be someone here who could share it, I would appreciate it very much.

Regards,

Andrew

[Rasika Nayanajith]

Since no console available to this AP model, I do not think you can do much about it. 

One thing I would do is try to put AP on the same vlan as WLC mgmt & see if that able to find WLC & get image upgraded.

HTH

Rasika

*** Pls rate all useful responses ***

[David Ritter]

The OEAP contains its original image (7.0.112.x) in nvram.  Press and hold the reset button while you reenergize the device.

That being said, does not your 602 offer up an IP (default) 10.0.0.100 to your laptop plugged into port 1? 

Does it not report an L2 (mac) link to your switch or acquire an IP?

 I do believe they had a life-time hardware warrantee..